Siemens prosave v15 download9/25/2023 Now here we’re going to press “Transfer,” so we can start the connection for ProSave. And then OK and let’s close out of our Control Panel. If we don’t know what the IP address is, you can just go to “Properties” right there and then you can go to “PN_X1” which is your Ethernet port, and see it’s “192, 168, 0.2.” Say OK, and let’s close out this. So, let’s get on the HMI and “Stop the Runtime.” Go to “Settings” or “Control Panel” and then go to “Transfer Settings.” Then on this list, we’re going to choose Ethernet. So, let’s go check our transfer settings. Now what we need to do is double check that we have our HMI set up for Ethernet. Typically, I just go to My Wireless, click “Open Network and Sharing Center,” and then I click my Local Area Connection and then you just press “Details” and that will tell you what your network adapter is on your PC’s IP – See “192, 168, 0.98.” You will need to set the IP of the computer to something other than the HMI. Let’s stop right here and check our PC’s IP and this is how you would do it. I am going to choose Ethernet because I could just type in a straight IP address, and I know the IP address of the panel is. I have a Comfort Panel TP700, and this is where you make your connection. Alright let’s open up ProSave and let’s choose the device that we’re going to be connecting up to.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |